Repair for broken mounting posts on “classic transport”.
Below is the classic transport with good mounting posts.
Below is the classic transport with mounting posts broken in shipment. Due to the weight distribution usually the left posts
break and the right posts stay in tact.
These are the parts necessary for the repair. Two each #6 flat washers, #6 star washers, 1” 6x32 Phillips head bolts, 3/8” 6x32 Phillips head bolts and 3/8” 6x32 threaded standoffs.
Drill through the remaining nylon standoff with a 7/64” bit to clear the center then a 9/64” bit.
Insert the 1” bolt in the hole from the back of the transport and thread on the standoff.
Mount the transport with the remaining hardware.
Mount the flat washer against the chassis and the star washer against the head of the 3/8” bolt.
